Galvanized gabions component of the formula
Silk warp. × silk warp. Bottom × length × width × ÷ 2 = kg
Base: 1/2 "= 2.15 = 1.273 / 4" = 1.65 / 8 "= 1.875 / 4 = 1.09
1 "X1 / 2": silk warp. × silk warp. Length × width × 2 ÷ 8X3 = kg

Standard galvanized gabions
Galvanized gabion scale: 2M × 1 m × 1 m, 3 m × 1 m × 1 m, 4 m × 1 m × 1 m 2 m × 1 m × 0.5,4 m × 1 m × 0.5, but also can be based on customer demand into line production, the appearance of hot-dip galvanized.

Galvanized gabions parameters
(1) Diameter: 60 * 80MM, 80 * 100MM, 80 * 120,100 * 120,120 * Some of the double-stranded 150mm length should not be less than 50mm. Some of galvanized steel to ensure the stay is not jeopardized.
(2) wire diameter: gabion wire diameter in three - network, edge wire, tie wire
     A. The scale of the grid 2mm-4mm
     B. marginal coarse mesh is usually greater than 0.5MM-1 mm
     C. is typically less than the tie wire, 2.2 mm in the most common
(3) Wire tension: not less than 38kg/m2380N/mm
(4) disposal of the appearance