A, Gabions each long 2500px, width 2500px, high 1250px, materials: used hot dip 10% aluminum-zinc wire.
B, model: mesh 80mm × 100mm; mesh panel Φ2.7mm, film Φ3.7mm; wire mesh sides Φ3.15mm, after coating Φ4.15mm.
C, gabions Box accessories : ligation Φ2.2mm, after coating Φ3.2mm, spacing 250-300mm.
D, the material can be filled gabions stone or gravel . Fill the stone should be homogeneous, no cracks, no morals . The filler particle size should be controlled to 15 ~ 25 cm in diameter more than 80 % with the remainder using well-graded gravel filling , and filling the cage density requires not less than 1.8 tons / m .
E, gabions construction should first start from both sides of the river , the river bottom- fortified slope . Gabion finished design should be in place first and then fill the stone, gabion stone in handling and filling process must be handled with care to not damage the appearance of gabion wire corrosion aluminum-zinc coating . When assembled stone facade should be placed flat and beautiful.